European Assessment Documents歐洲技術評估(EADs)/ ETA認證

歐洲技術評估(ETA)是一份根據建筑產品基本特征提供其性能信息的聲明文件，自2013年7月1日起在所有歐洲成員國和歐洲經濟區生效的《新建筑產品條例(歐盟)第305/2011號》中已有ETA認證的相關詮釋。建筑建材產品的ETA認證是對產品在指定應用范圍技術性能的有力證明，由建筑材料制造商自愿申請。建筑建材類產品可以申請ETA認證的前提是：建筑產品不在或不受任何歐洲統一標準(hEN)及其評估方法和載于標準歐洲評估文件(EAD)中，當產品通過ETA符合性證明程序，滿足ETA相關標準，歐洲技術認可認證機構將允許制造商在產品上標注CE標識。邁希澤在eta認證領域內有豐富的經驗。

歐盟建材(EADs)/ ETA認證的變化

根據ETAs的有關規定：截至2013年6月30日(即歐洲批準)的ETAs在其有效期結束之前仍然有效，可以被制造商用作歐洲技術評估，但這種類型的ETAs在2018年將從市場上消失，在2013年7月1日之后發布的ETA的有效期是不確定的。

根據 (歐盟)第305/2011號(CPR) 規定，建筑材料制造商在市場上發布建筑產品和當該產品被歐洲技術評估(ETA)評估時，應負責提供該產品的性能聲明(DoP)。經評估通過后，CE標志應貼在該產品上，并表明制造商對該產品與聲明的性能相符負有責任。

歐盟建材(EADs)/ ETA認證所需提交的文件
1、The Application Form 產品認證申請表  
2、Description of the construction product 建筑建材類產品說明 
3、Product specifications 產品規格書
4、Test reports 產品檢測報告（如生產商曾為該產品申請檢測） 
5、Drawings 產品爆炸圖  
6、The intended use of the product 產品使用說明

歐盟建材ETA認證目錄/EADs認證目錄
Legislation : Regulation (EU) No 305/2011 - Construction products

EAD 150003-00-0301 - High strength cement
EAD 010001-00-0301 - Precast concrete composite wall with point connectors
EAD 010003-00-0301 - Precast balcony elements made of ultra-high performance fibre reinforced concrete (UHPFRC)
EAD 010013-00-0301 - Lightweight panel made of mortar of cement and granulated EPS reinforced by a glass fibre mesh and an internal steel railing
EAD 010028-00-0103 - Shallow and reusable foundation kit for lightweight structures

EAD 020001-01-0405 - Multi-axis concealed hinge assemblies
EAD 020002-00-0404 - Balcony (and terrace) glazing system without vertical frames
EAD 020011-00-0405 - Roof, floor, wall and ceiling hatches providing access or for use as an emergency door / with or without fire resistance.
EAD 020029-00-1102 - Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel
EAD 030019-00-0402 - Liquid applied roof waterproofing on the basis of polysiloxane

EAD 030065-00-0402 - Composite roof waterproofing kit
EAD 030092-00-0605 - Non-flexible mineral sealing slurry kit on the basis of cement
EAD 030218-00-0402 - Membrane for use as roof underlay
EAD 040005-00-1201 - Factory-made thermal and/or acoustic insulation products made of vegetable or anymal fibres
EAD 040007-00-1201 - Thermal insulation products for buildings with radiant heat reflective component

EAD 040010-00-1201 - Insulation product made of expanded perlite (EPB)
EAD 040011-00-1201 - Vacuum insulation panels (VIP) with factory applied protection layers
EAD 040012-00-1201 - thermal insulation board made of mineral material
EAD 040016-00-0404 - Glass fibre mesh for reinforcement of cement based renderings
EAD 040037-00-1201 - Low lambda composite boards made of mineral wool fibres and aerogel additives

EAD 040048-01-0502 - Rubber fibre mat to be used for impact sound insulation.
EAD 040049-00-0502 - Polyurethane (PU) foam mat to be used for impact sound insulation
EAD 040057-00-1201 - Thermal insulation board made of microporous silica
EAD 040065-00-1201 - Thermal insulation an/or sound absorbing boards based on expanded polystyrene and cement
EAD 040089-00-0404 - External Thermal Insulation Composite Systems with renderings for the use on timber frame buildings

EAD 040090-00-1201 - Factory-made boards and products formed by moulding of an expanded polylactic acid (E-PLA) for thermal and/ or acoustical insulation
EAD 040138-00-1201 - In-situ formed loose fill thermal and/or acoustic insulation products made of vegetable fibres
EAD 040287-00-0404 - Kits for external thermal insulation composite system (ETICS) with panels as thermal insulation product and discontinuous claddings as exterior skin
EAD 040288-00-1201 - Factory-made thermal and acoustic insulations made of polyester fibres

EAD 040313-00-1201 - In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork
EAD 040369-00-1201 - Insulation made of loose-fill or compound granulated expanded cork
EAD 040394-00-1201 - Factory made cellular glass loose fill
EAD 040456-00-1201 - In-situ formed loose-fill thermal and/or acoustic insulation material made of animal fibres
EAD 040461-00-1201 - thermal insulation product made of loose fill expanded perlite (EP)

EAD 040635-00-1201 - Thermal and/or sound insulation based on bound expanded polystyrene bulk material
EAD 040643-00-1201 - Fiber reinforced silica aerogel thermal insulation
EAD 040650-00-1201 - Extruded polystyrene foam boards as load bearing layer and/or thermal insulation outside the waterproofing
EAD 040777-00-1201 - Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing
EAD 050001-00-0301 - Load bearing thermal insulating elements which form a thermal break between balconies and internal floors

EAD 050004-00-0301 - Spherical and cylindrical bearing with special sliding material made of UHMWPE (Ultra high molecular weight poyethylene)
EAD 050009-00-0301 - Spherical and cylindrical bearing with special sliding material made of fluoropolymer
EAD 050013-00-0301 - Spherical and cylindrical bearing with special sliding material made of filled PTFE with solid lubricant and reinforcing fibres
EAD 060001-00-0802 - Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1 W3 Gxx
EAD 060003-00-0802 - Chimney kit with clay/ceramic flue liner and with specific outer wall with classification T 400 (minimum) N1 W 3 Gxx

EAD 060008-00-0802 - Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1/P1 W 3 Gxx and with different outer walls and possible change of outer wall
EAD 070001-01-0504 - Gypsum plasterboard for load bearing applications
EAD 070002-00-0505 - Glass fibre joint tape for gypsum plasterboards
EAD 080001-00-0403 - geocomposite for drainage system
EAD 080002-00-0102 - Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate

EAD 090001-00-0404 - Pre-fabricated compressed mineral wool boards with organic or inorganic finish and with specified fastening system
EAD 090017-00-0404 - Point supported vertical glazing
EAD 090019-00-0404 - Kits for ventilated external wall claddings of lightweight boards on subframe with rendering applied in situ with or without thermal insulation
EAD 090020-00-0404 - Kits for external wall claddings made of agglomerated stone
EAD 090034-00-0404 - Kit composed by subframe and fixings for fastening cladding and external wall elements

EAD 090035-00-1201 - Insulated glass unit with structural sealant punctually anchored
.   EAD 090058-00-0404
More Info EAD 090058-00-0404 - Ventilated external wall cladding kit comprising a metallic honeycomb panel and its associated fixings

EAD 120001-01-0106 - Microprismatic retro-reflective sheetings
EAD 120003-00-0106 - Steel lighting columns
EAD 120011-00-0107 - Flexible plug expansion joints for road bridges with flexible filling EAD 130002-00-0304 - Solid wood slab element - element of dowel jointed timber boards to be used as a structural element in buildings
EAD 130005-00-0304 - Solid wood slab element to be used as a structural element in buildings

EAD 130010-00-0304 - Glued laminated timber made of hardwood - structural laminated veneer lumber made of beech
EAD 130011-00-0304 - Prefabricated wood slab element made of mechanically jointed square-sawn timber members for use as structural element in buildings
EAD 130012-00-0304 - Strength graded structural timber - square edged logs with wane - chestnut
EAD 130013-00-0304 - Solid wood slab element to be used as a structural element in buildings - element of timber boards jointed by dovetail connections
EAD 130019-00-0603 - Dowel-type fasteners with resin coating

EAD 130022-00-0304 - Monolithic or laminated beam and wall logs made of timber
EAD 130033-00-0603 - Nails and screws for use in nailing plates in timber structures
EAD 130087-00-0204 - Modular construction system
EAD 130089-00-0304 - Structural wet and/or cold glued finger jointed solid timber
EAD 130090-00-0303 - Wood-concrete composite slab with dowel-type fasteners

EAD 130118-00-0603 - Screws for use in timber constructions
EAD 130166-00-0304 - Strength graded structural timber — steam-cured solid timber with rectangular cross section which may be finger jointed or not — softwood
EAD 130167-00-0304 - Strength graded structural timber - square edged logs with wane - softwood
EAD 130191-00-0304 - Prefabricated wood slab element made of jointed cross laminated log elements to be used as a structural element in buildings
EAD 130197-00-0304 - Glued laminated timber made of steam-cured solid timber with rectangular cross section – Softwood

EAD 140015-00-0304 - Walls, roofs and ceilings made of OSB-panels which are glued together on their surfaces
EAD 150001-00-0301 - Calcium sulphoaluminate based cement
EAD 150002-00-0301 - Calcium aluminate based refractory cement
EAD 150004-00-0301 - Rapid hardening sulfate resistant calcium sulphoaluminate based cement
EAD 150007-00-0301 - Portland-pozzolana cement for use in tropical conditions

EAD 150008-00-0301 - Rapid setting cement
EAD 150009-00-0301 - Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH)
EAD 160003-00-0301 - Double headed studs for the increase of punching shear resistance of flat slabs or footings and ground slabs
EAD 160004-00-0301 - Post-tensioning systems for prestressing of structures
EAD 160012-00-0301 - Headed reinforcement steel bars

EAD 160027-00-0301 - Special filling products for post-tensioning kits
EAD 180003-00-0704 - Gully tops and manhole tops made of the polyamide (PA) for external vehicular and pedestrian areas
EAD 180008-00-0704 - Trapped gully - removable - mechanical closure
EAD 180018-00-0704 - Flexible couplings for gravity and pressure sewerage and drainage pipes
EAD 190002-00-0502 - Dry floating flooring kit based on prefabricated interlocked units made of ceramic tiles and rubber mats

EAD 190005-00-0402 - Terrace decking kit
EAD 200001-00-0602 - Prefabricated steel and stainless steel wire ropes with end connectors
EAD 200002-00-0602 - Tension Rod System
EAD 200005-00-0103 - Structural steel piles with hollow sections and rigid splices
EAD 200012-00-0401 - Spacer kits for built-up metal roof and wall claddin

EAD 200014-01-0103 - Pile Joints and Rock shoes for concrete piles
EAD 200017-00-0302 - Hot rolled products and structural components made of steel grades Q235B, Q235D, Q345B AND Q345D
EAD 200019-00-0102 - Hexagonal woven mesh gabion boxes and mattresses
EAD 200020-00-0102 - Weldmesh gabion boxes and mattress
EAD 200022-00-0302 - Thermo-mechanically rolled long steel products made of weldable fine grain structural steel of special steel grades

EAD 200026-00-0102 - Steel mesh systemss for reinforced fill
EAD 200032-00-0602 - Prefabricated tension rod systems with special end connectors
EAD 200033-00-0602 - Nailed shear connector
EAD 200035-00-0302 - Roof and wall systems with hidden fastenings
EAD 200036-00-0103 - Kit for micropiles — Kit with hollow bars for self-drilling micropiles — Hollow bars of seamless steel tubes

EAD 200039-00-0102 - Hexagonal woven gabion boxes and mattresses with zinc coatings
EAD 200043-01-0103 - Pile pipes made of ductile iron
EAD 200050-01-0102 - Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh with pre-coated zinc and/or zinc+organic coating.
EAD 200086-00-0602 - Wire ring connection products
EAD 210004-00-0805 - Modular element for building services

EAD 210024-00-0504 - Cement-bonded boards
EAD 220006-00-0402 - Roofing slates made of polypropylene, limestone and fillers
EAD 220007-00-0402 - Fully supported copperalloysheet and strip for roofing, externalcladding and internal lining
EAD 220008-00-0402 - Eaves profiles for terraces and balconies
EAD 220010-00-0402 - Flat plastic sheets for fully supported discontinuous roofing and external cladding

EAD 220013-01-0401 - Self–supporting ridgelight.
EAD 220018-00-0401 - Decentralized energy efficient low-pressure ventilation unit with alternating flow and heat recovery
EAD 220021-00-0402 - Sun tunnel kits
EAD 220022-00-0401 - Polycarbonate snow stopper for roof
EAD 220025-00-0401 - Cantilevered Structural horizontal glazing (structural glass canopy/roof)

EAD 220069-00-0402 - Flat and profiled (with a pattern) plastic roofing sheets made of recycled material for fully supported discontinuous roofing
EAD 230004-00-0106 - Wire ring mesh panels
EAD 230005-00-0106 - Wire rope net panels
EAD 230008-00-0106 - Double twisted steel wire mesh reinforced or not with ropes
EAD 230011-00-0106 - Road marking products

EAD 230012-00-0105 - Additives for asphalt production - bitumen granules made from recycled bituminous roofing felt
EAD 230012-01-0105 - additives for asphalt production - additive from bitumen granules made from recycled bituminous roofing felt
EAD 230025-00-0106 - Flexible facings systems for slope stabilization and rock protection
EAD 260001-00-0303 - Structural sections made from fibre reinforced polymers (FRP/Glassfiber Composites)
EAD 260002-00-0301 - Alkali resistant glass fibres containing zirconium dioxide for use in concrete

EAD 260006-00-0301 - Polymeric concrete addition
EAD 260007-00-0301 - Type I addition for concrete, mortar and screed materials – Aqueous solution
EAD 260009-00-0301 - Processed bottom ash from municipal solid waste incinerators as type II addition for production of concrete, mortar and grout
EAD 260035-00-0301 - Natural calcined pozzolana as type II addition for concrete
EAD 280001-00-0704 - Preassembled line unit for drainage or infiltration

EAD 290001-00-0701 - Kit for the transport of cold and hot water inside buildings
EAD 320002-02-0605 - Coated metal water stop sheet for construction and controlled crack joints in waterproof concrete
EAD 320008-00-0605 - Swellable joint sealing tape on the basis of bentonit for construction joints in watertight concrete
EAD 330001-00-0602 - Expanding Structural Bolting Assemblies for Blind Fastening
EAD 330008-02-0601 - Anchor channels

EAD 330011-00-0601 - Adjustable concrete screws
EAD 330012-00-0601 - Cast-in anchor with internal threaded socket
EAD 330014-00-0601 - Metal expansion fastener for use in autoclaved aerated concrete
EAD 330046-01-0602 - 330046-01-0602
EAD 330047-01-0602 - Fastening screws for sandwich panels

EAD 330075-00-0601 - Elevator lifting device
EAD 330076-00-0604 - Metal injection anchors for use in masonry.
EAD 330079-00-0602 - Floor fixing assemblies for use in checker plate or open bar grating
EAD 330080-00-0602 - High Slip Resistance Clamp (HSR) Assembly
EAD 330083-02-0601 - Power-actuated fastener for multiple use in concrete for non-structural applications.

EAD 330084-00-0601 - Steel plate with cast-in anchor
EAD 330087-00-0601 - Systems for post-installed rebar connections with mortar
EAD 330153-00-0602 - Cartridge fired pin for connections of thin gauge steel members and sheeting
EAD 330155-00-0602 - Self adjustable clamp assemblies
EAD 330196-01-0604 - Plastic anchors made of virgin or non-virgin material for fixing of external thermal insulation composite systems with rendering

EAD 330232-00-0601 - Mechanical fasteners for use in concrete
EAD 330389-00-0601 - Point connector of glass fibre reinforced polymer for sandwich walls
EAD 330499-00-0601 - Bonded fasteners for use in concrete
EAD 330667-00-0602 - Hot-rolled mounting channel
EAD 330747-00-0601 - fasteners for use in concrete for redundant non-structural systems

EAD 330924-00-0601 - Cast-in anchor bolts of ribbed reinforcing steel
EAD 330965-00-0601 - Powder actuated fastener for the fixing of ETICS in concrete
EAD 331852-00-0102 - spiral cable anchor
EAD 340002-00-0204 - Panels of steel wires with incorporated thermal insulation for a whole structure
EAD 340006-00-0506 - Prefabricated stair kits

EAD 340020-00-0106 - Flexible kits for retaining debris flows and shallow landslides/open slope debris flows
EAD 340025-00-0403 - Substructure kit for heated buildings
EAD 340037-00-0204 - Light weight steel/wood load bearing roof elements
EAD 350003-00-1109 - Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of mechanically pre-coated steel sheet) and accessories
EAD 350005-00-1104 - Intumescent products for fire sealing and fire stopping purposes

EAD 350022-01-1107 - Kit for closure system for conveyor systems
EAD 350134-00-1104 - Fire proof water trap with intumescent fire seal (combined with a stainless steel floor gully penetration)
EAD 350140-00-1106 - Renderings and rendering kits intended for fire resistant applications
EAD 350141-00-1106 - Linear joint and gap seals
EAD 350142-00-1106 - Fire protective board, slab and mat products and kits

EAD 350402-00-1106 - Reactive coatings for fire protection of steel elements
EAD 350454-00-1104 - Fire stopping and fire sealing products - Penetration seals
EAD 360001-00-0803 - Ventilation system made of mineral wool covered with film (outside and EAD 360005-00-0604 - Cavity tray

歐洲(EADs)/ ETA認證認證成員
EOTA成員有：捷克共和國TZUS&CSI、邁希澤eta認證、斯洛伐克共和國TSUS、奧地利OIB、比利時BUTGA、塞浦路斯PWD、丹麥ETA-DANMARK、愛沙尼亞TUT、芬蘭VTT、法國CSTB&SETRA、德國DIBt、希臘ELOT、匈牙利EMI、冰島NMI、意大利STC&CSEA、邁希澤eta認證、立陶宛SPSC、盧森堡PCH、荷蘭SBK&INTRON&SKH&IKOB-BKB BV&BMC&SKG&KIWA&TNO、挪威SIN TEF、波蘭ITB、葡萄牙LNEC、斯洛文尼亞ZAG、西班牙IETc c &ITeC、瑞典SITAC、瑞士EMPA、土耳其ITBAK。